Nissan Patrol Y61

Features:

• Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
• Uses the cars factory sensors
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista, Windows 7 compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
• Diagnostic Trouble Code Storing & Check Engine Light Controll
  (Access through laptop only )
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port

Factory Outputs:

• 6 x Fuel Injector outputs
• 6 x Ignition outputs
• Tacho , VIAS Control (Variable Intake Air Solenoid) , Idle Control
• Thermo Fan, N-VCT ( Nissan Variable CAM Timing Control) , Fuel Pump
• EVAP Control Solenoid Valve, A/C Clutch Relay, Check Engine Light

Factory Inputs:

• MAF Sensor, Throttle Position Sensor, Knock Detection Sensors
• Oxygen Sensors, Coolant Temperature Sensor, Vehicle Speed Sensor
• Power Steering Switch, 4WD Switch

Expansion I/O*:

• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital pulsed outputs

*Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:

• Knock Control
• Long Term Fuel Trim
• N-VCT On – Base Tables
• Closed Loop O2 Control (Dual Bank)
• Decel Cut
• Over Boost
• Rev Limiter
• Closed & Open Loop Boost Control
• Gear Setup
• Transient Throttle Enhance

Correction Tables: Fuel Ignition Boost:

• Cranking
• Air Temp Target Correction
• Map Correction
• Zero Throttle Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1*
• Generic Correction 2*
• Gear Correction
• Post Start
• Air Temp Duty Correction
• Post Start

* Generic Correction tables have user definable axis

Miscellaneous:

• Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing

Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC

Physical Dimensions:
ECU Dimensions Length: 210mm (225mm with MAP nipple)
Width: 158mm Height: 42mm Weight: 690g (1.5 lb)

Applications:
Nissan Patrol Y61 Series 2002 – 2009 Engine Codes: TB48DE
Transmission: Manual Only (Automatic not supported)
Factory Functions not Supported: Immobiliser

The Kit includes:
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)