Platinum Pro R32/R33 Plug-in 
Features:
- Direct plug and play replacement of the OEM ECU, no rewiring necessary.
- Uses the cars factory sensors
- Supports R32 GT-R twin MAF sensors
- Supports Sequential Injection (peak and hold) and Direct fire ignition
- Windows 2000, XP, Vista compatible software
- Real time programming, instant hesitation free adjustment while engine is running
- Fully user definable 32 x 32 mapping
- Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
- Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
- Wideband “auto tuning” using user definable target AFR table
- USB and CAN Communication Port
Factory Outputs:
- 6 x Fuel Injector outputs
- 6 x Ignition outputs
- Tacho, Boost Control, AC Clutch Relay, Idle Control
- Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)
- N-VCT ( Nissan Variable CAM Timing Control)
Factory Inputs:
- MAF sensors, Throttle Position Sensor, Oxygen sensors,
- Coolant Temperature sensor, Vehicle Speed Sensor,
- Air Temperature sensor.
Expansion I/O (Optional auxiliary harness required to be purchased Haltech Part # HT040003):
- 2 x Analogue Voltage inputs
- 2 x Analogue Temperature inputs
- 4 x Digital pulsed outputs
Functions:
- Closed Loop O2 Control
- Decel Cut Over Boost Rev Limiter
- Closed & Open Loop Boost Control
- Gear Setup
- ACF On Base Tables
- Transient Throttle Enhance
Correction Tables: Fuel Ignition Boost:
- Cranking
- Air Temp Target Correction
- Coolant Temperature Correction
- Map Correction
- Zero Throttle Gear Correction
- Cylinder Trim
- TPS Correction
- Generic Correction 1
- Generic Correction 2
- Gear Correction
- Post Start
- Air Temp Duty Correction
- Post Start
Miscellaneous:
- Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
- Max 20 channels logging capability
- Tune can be password protected in software
- Rugged anodized aluminum casing
Power Requirements:
- Source: 8.6 to 16.5 Volts DC
- Consumption: 530mA @ 12Volts DC
Physical Dimensions:
- ECU Dimensions Length: 154mm (174mm with MAP nipple)
- Width: 158mm Height: 42mm Weight: 680g (1.5 lb)
Applications:
- Nissan Skyline R32 (GT-R, GTS-t Variations)
- Nissan Skyline R33 (GT-R, GTS-t Variations)
Engine Codes:
- RB25DET (Manual Only, Automatic Not Supported)
- RB26DETT (Manual Only, Automatic Not Supported)
R32 / R33 Platinum Pro Plug-In Specifications available for download from Haltech's website.
The R32/33 Platinum Pro Plug-in Kit includes:
- Pro Plug-in ECU
- USB Cable
- Programming Software CD
- Quick Start Guide
- Instruction Manual (on CD)
|