Water Injection Kits / Intercooler Water Spray Components
|
|
CAPA Water Injection Systems 
Specifically engineered to maximise the power output and reduce the chance of detonation on highly supercharged vehicles. Water injection (or intercooling) is essential in maintaining air intake charge density with your supercharged application when running anything above 6psi (depends on the type of supercharger used in the application). |
|
 |
 |
Fixed water mist nozzles.
Nickel Plated, Brass Water Jet.
Hosetail for 4mm Pipe.
M8 x .75mm Thread Pitch
Screw Thread.
Available with .6mm, .8mm or 1.0mm outlet.
6mm Hosetails and other sizes also available, please call for more information. |
|
|
|
Intake Components
|
|
Inlet Hose, Cloth
Inlet Hose 3-1/2" Cloth (900mm)
Inlet Hose 4" Cloth (900mm)
|
|
 |
|
3.5" Inlet Joiner Sleeve, PCV/BOV Return
|
|
 |
|
| VORTECH/CAPA Tight Clearance 90 Degree Inlet, Plastic Duct |
|
 |
|
Discharge Components
|
|
Bosch/CAPA Blow Off Valve
|
|
 |
|
3" Aluminium Discharge Tube
Universal with rubber grommet in 85mm, 120mm, 170mm and 280mm length.
85mm, Suits VT V8 Series 1
120mm, Suits LS1, VS-VT Ecotec V6
170mm, Suits AU V8, Toyota Landcruiser
280mm, Suits VN-VR V6
Specially bent sections with rubber grommet to suit:
VN-VS V8 Commodore
EF-AU 6cyl Falcon
EB-EL & BA V8 Falcon
Straight lengths without rubber grommet in 400mm and 550mm lengths available. |
|
 |
|
Plastic Angles
3.5" 90 Degree Plastic Angle
3.5" 180 Degree Plastic Angle
3.5" 90 Degree Plastic Angle with Bosses |
|
|
|
| VORTECH/CAPA TPI Throttle Body Duct, 3" - 4" oval with splitter |
|
 |
|
Belts
|
|
Supercharger Belts
We carry a large range of 6 to 10 Rib and Gilmer Drive Belts to suit our supercharger kits. |
|
 |
|
Pulley Kits, Pulleys & Spacers
|
|
Supercharger Drive Pulleys
Application Specific and Universal Pulleys to suit a wide range of applications. 8-10 Rib and Gilmer Pulleys available. |
|
 |
|
Tensioners
Tensioner Eccentric Steel
Tensioner Assembly 6 Rib Swivel
Tensioner Assembly 8 - 10 Rib Swivel
Tensioner Assembly Cog System Flat Plate
Tensioner Assembly Cog System Swivel
Idler Pulley Only Cog System
Universal 6 Rib Plastic Pulley
Tensioner Eccentric Aluminium
|
|
 |
|
Supercharger Bracket Kits
|
|
Supercharger Bracket Kits
Available to suit most Commodores and Falcons. Universal Brackets also available to suit Vortech and Powerdyne Superchargers.
|
|
 |
|
Hardware / Hoses
|
|
| Oil Feed Hose & Drain Fittings, Superchargers Universal |
|
 |
|
| Hobb Switch 'T' Piece 4 or 10mm |
|
 |
|
Hobb Pressure and Vacuum Switches
NC - Vacuum Switch
NO - Boost / Pressure Switch |
|
 |
|
| FMU/Turbo Air Bleed 4mm Tee |
|
 |
|
| FMU 90 Degree Fittings |
|
 |
|
| FMU Straight Fitting |
|
 |
