|
VE L76 6.0L Crate Engine - Brand New  
Includes The Following:
- Complete from Rocker Covers to Sump
- Inlet Manifold and Full Injection
- Coil Packs and Leads
- All Potentiometers and Other Emission Valves
- Exhaust Manifolds
- Injection Wiring
- Auto Drive Plate
- Harmonic Balancer
- Water Pump
- Throttle Body
Accessories, Fitting Kits, ECU's, ECU Upgrades and Gearboxes also Available. Contact us for more information.
Normally the L76 Crate Engines retail for around $10,000.
|
 |
|
VE LS3 6.2L Crate Engine - Brand New
Includes The Following:
- Complete from Rocker Covers to Sump
- Inlet Manifold and Full Injection
- Coil Packs and Leads
- All Potentiometers and Other Emission Valves
- Exhaust Manifolds
- Injection Wiring
- Auto Drive Plate
- Harmonic Balancer
- Water Pump
- Throttle Body
Accessories, Fitting Kits, ECU's, ECU Upgrades and Gearboxes also Available. Contact us for more information.
Normally the LS3 Crate Engines retail for over $10,000.
|
|
 |
VZ Engine into VT-VY Commodore - Conversion Parts
VT-VY LS-1 Chopper Disc
VT-VY LS-1 Camshaft Sprocket
ARP2000 Rod Bolts
Adapter Looms (MAP, Knock, Cam, Injectors)
L-76 4 Bolt Throttle Body, Cable Style
|
|
 |
Ported Cylinder Heads
CS - CAPA Ported Cylinder Heads, Standard Valves (Exchange).
CSV - CAPA Ported Cylinder Heads, Stainless Steel Valves (Exchange).
CBV - CAPA Ported Cylinder Heads, Large Valves. 208 Inlet, 1.6
Exhaust (Exchange).
-
Please note that there is a $1500.00 Deposit required for Heads. Heads are
sold on an Exchange Basis.
-
ECU Tune for Cam and Head Combinations available. MAF-less tune also
available.
-
CAPA Recommends installing the following components before Heads and Camshaft
are installed:
- Cold Air Intake
- K&N Filter
- MAF Meter (If not MAF-less)
- MAF Tube
- Large BBK Throttle Body
- Extractors, High Flow Cats, 2.5"
Twin Exhaust System
|
|
 |
Custom Grind Camshafts (to suit any application)
Camshaft Profile |
CAPA
230
206 @ 050" |
CAPA
250
212 @ 050" |
CAPA
280
218 @ 050" |
CAPA
300
223 @ 050" |
| Standard Heads |
220 kW |
230 kW |
240 kW |
250 kW |
| CAPA CS
Heads |
230
kW |
240
kW |
250
kW |
265
kW |
| CAPA CSV Heads |
235 kW |
245 kW |
255 kW |
270 kW |
| CAPA CBV
Heads |
240
kW |
260
kW |
280
kW |
300
kW |
kW @ Wheels Shown Above.
Multiply by 26% for Manual Transmission to show engine Kilowatts |
|
 |
T-Rex Fuel Pump Kit |
|
 |
Vortech Billet Aluminium Hi-Flow Fuel Rails |
|
 |
Billet Aluminium Fuel Regulator (for return line modification) |
|
 |
Electronic Fuel Pump Pressure Controller |
|
 |
Engine Oil Cooler Kit |
|
 |
1.8:1 Rocker Set (Rockers Only) |
|
 |
1.7:1 Roller Rocker Kit (shaft mount) |
|
 |
Valve Spring / Collett Kit |
|
 |
383cui Stroker Kit |
|
 |
CAPA Harmonic Balancer (Suit
Supercharger Drive System)
CAPA Harmonic Balancer, 10% Underdrive
CAPA Harmonic Balancer, 25% Underdrive |
|
 |
Vortech Performance Harmonic Balancer (with Key) |
|
 |
Vortech Performance Harmonic Balancer (with Gilmer & Key) |
|
 |
Vortech Supercharger Support Strut Brace assembly |
|
 |
LS-1 Big Block / LS-6 Block Assembly, Cast Blocks |
|
 |
LS-1 Steel Main Caps |
|
 |
LS-1 Custom 4340 Forged Con-Rods I&H Beam |
|
 |
Performance Con-Rod Bearings |
|
 |
LS-1 Custom 3.9"-4.125" Forged Pistons |
|
 |
Piston Ring Set |
|
 |
LS-1 Custom 3-6-4.125" 4340 Forged Crankshaft |
|
 |
Stainless steel shim Head Gaskets (Std . +0.27") |
|
 |
LS-1 Head Stud Kit |
|
|
LS-6 Breather Cover (Knock Sensor Cover)
|
|
|
 |
LS-6 PCV Valve and Hose Assembly |
|
 |
Oil / Air Separator Crank Case |
|
 |
Sump - High Volume |
|
