CAPA Performance

CHECK OUT OUR NEW WEBSITE - WWW.CAPAPERFORMANCE.COM.AU


	Products by Vehicle
	2018 Mustang V8 15-17 Mustang V8 HSV Gen-F LSA Camaro LT1 More Vehicles..


	Products
	Supercharger Kits Supercharger Head Units Supercharger Kit Parts Supercharger Rebuilds and Repairs Fuel Systems Engine Management Holden Power Parts LSA Power Parts Camaro Power Parts Ford Power Parts Chrysler Power Parts Clothing & Merchandise


	Fuel Systems
	Fuel Injectors, Connectors and Rails Fuel Pumps Fuel Pump Voltage Boosters Fuel Regulators

Home > Fuel Systems > Fuel Injectors, Connectors and Rails

Fuel Injectors, Connectors and Rails

Holden Fuel Injectors - Fuel Injector Clinic

	Fuel Injector Clinic 660cc Short, USCAR Connector P/N: IS303-0660H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore Short Length (40mm) - Upper to Lower O-Ring USCAR Connector Suitable for L76, L77, L98, LS3 and LSA (Eg VZ 6.0L, VE-VF 6.0L, VF 6.2L). 8 x 660cc/min (62lbs/hr) at 3 bar (43.5psi) fuel pressure and 72lbs/hr (765cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play GM ECU Data available at http://fuelinjectorclinic.com/GMData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 1000cc Short, USCAR Connector P/N: IS303-1000H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore Short Length (40mm) - Upper to Lower O-Ring USCAR Connector Suitable for L76, L77, L98, LS3 and LSA (Eg VZ 6.0L, VE-VF 6.0L, VF 6.2L). 8 x 1000cc/min (85lbs/hr) at 3 bar (43.5psi) fuel pressure and 110lbs/hr (1040cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play GM ECU Data available at http://fuelinjectorclinic.com/GMData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 1650cc Short, USCAR Connector P/N: IS303-1650H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore Short Length (40mm) - Upper to Lower O-Ring USCAR Connector Suitable for L76, L77, L98, LS3 and LSA (Eg VZ 6.0L, VE-VF 6.0L, VF 6.2L). 8 x 1650cc/min (160lbs/hr) at 3 bar (43.5psi) fuel pressure and 180lbs/hr (1900cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play GM ECU Data available at http://fuelinjectorclinic.com/GMData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 650cc 3/4 Length, USCAR Connector P/N: IS302-0650H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore 3/4 Length (55mm) - Upper to Lower O-Ring USCAR Connector Suitable for LS2 (Eg VZ HSV LS2, VE HSV LS2) Includes O-Rings as per photo. 8 x 650cc/min (62lbs/hr) at 3 bar (43.5psi) fuel pressure and 72lbs/hr (750cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play GM ECU Data available at http://fuelinjectorclinic.com/GMData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 1000cc 3/4 Length, USCAR Connector P/N: IS302-1000H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore 3/4 Length (55mm) - Upper to Lower O-Ring USCAR Connector Suitable for LS2 (Eg VZ HSV LS2, VE HSV LS2) Includes O-Rings as per photo. 8 x 1000cc/min (85lbs/hr) at 3 bar (43.5psi) fuel pressure and 110lbs/hr (1040cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play Dodge ECU Data available at http://fuelinjectorclinic.com/GMData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 650cc Full Length, USCAR Connector P/N: IS301-0650H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring USCAR Connector Suitable for LS1 (eg VT-VZ 5.7L Commodore) Includes Connectors with Pigtails as per photos. Please Note: The Connectors will need to be soldered into your existing loom. 8 x 650cc/min (62lbs/hr) at 3 bar (43.5psi) fuel pressure and 72lbs/hr (750cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play GM ECU Data available at http://fuelinjectorclinic.com/GMData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 1000cc Full Length, USCAR Connector P/N: IS301-1000H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring USCAR Connector Suitable for LS1 (eg VT-VZ 5.7L Commodore) Includes Connectors with Pigtails as per photos. Please Note: The Connectors will need to be soldered into your existing loom. 8 x 1000cc/min (85lbs/hr) at 3 bar (43.5psi) fuel pressure and 100lbs/hr (1040cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play GM ECU Data available at http://fuelinjectorclinic.com/GMData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

Ford Fuel Injectors - Fuel Injector Clinic

	Fuel Injector Clinic 1000cc Full Length Coyote, USCAR Connector P/N: IS403-1000H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring USCAR Connector Suitable for Ford Mustang 5.0L GT (2005-2020) 8 x 1000cc/min (95lbs/hr) at 3 bar (43.5psi) fuel pressure. Plug and Play Ford ECU Data available at http://fuelinjectorclinic.com/FordData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 1000cc 3/4 Length, USCAR Connector P/N: IS412-1000H Manufactured by Fuel Injector Clinic Matched Set of 6 Injectors 14mm Fuel Rail Bore 3/4 Length (55mm) - Upper to Lower O-Ring USCAR Connector Suitable for FG XR6 Turbo 6 x 1000cc/min (85lbs/hr) at 3 bar (43.5psi) fuel pressure. Plug and Play Ford ECU Data available at http://fuelinjectorclinic.com/FordData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 1440cc 3/4 Length, USCAR Connector P/N: IS412-1440H Manufactured by Fuel Injector Clinic Matched Set of 6 Injectors 14mm Fuel Rail Bore 3/4 Length (55mm) - Upper to Lower O-Ring USCAR Connector Suitable for FG XR6 Turbo 6 x 1440cc/min (140lbs/hr) at 3 bar (43.5psi) fuel pressure. Plug and Play Ford ECU Data available at http://fuelinjectorclinic.com/FordData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 1000cc Full Length, USCAR Connector P/N: IS412-1000H-EXT Manufactured by Fuel Injector Clinic Matched Set of 6 Injectors 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring USCAR Connector Suitable for BA-BF XR6 Turbo 6 x 1000cc/min (85lbs/hr) at 3 bar (43.5psi) fuel pressure and 110lbs/hr (1040cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play Ford ECU Data available at http://fuelinjectorclinic.com/FordData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

	Fuel Injector Clinic 1440cc Full Length, USCAR Connector P/N: IS412-1440H-EXT Manufactured by Fuel Injector Clinic Matched Set of 6 Injectors 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring USCAR Connector Suitable for BA-BF XR6 Turbo 6 x 1000cc/min (85lbs/hr) at 3 bar (43.5psi) fuel pressure and 110lbs/hr (1040cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play Ford ECU Data available at http://fuelinjectorclinic.com/FordData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

Chrysler Fuel Injectors - Fuel Injector Clinic

	Fuel Injector Clinic 1000cc 3/4 Length, USCAR Connector P/N: IS153-1000H Manufactured by Fuel Injector Clinic Matched Set of 8 Injectors 14mm Fuel Rail Bore 3/4 Length (55mm) - Upper to Lower O-Ring USCAR Connector Suitable for SRT-8 8 x 1000cc/min (85lbs/hr) at 3 bar (43.5psi) fuel pressure and 100lbs/hr (1040cc/min) at OE 58psi (4 bar) fuel pressure. Plug and Play Dodge ECU Data available at http://fuelinjectorclinic.com/DodgeData This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on a detailed flow sheet included with the set. Fuel Injector Clinic provide the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

Short Length (40mm) Injectors - Minitimer / Jetronic Connector

	668cc Injectors, Short (Minitimer / Jetronic Connector) P/N: INJ-668-MT-S Manufactured by Siemens 14mm Fuel Rail Bore Short Length (40mm) - Upper to Lower O-Ring Minitimer / Jetronic Connector

	875cc Injectors, Short (Minitimer / Jetronic Connector) P/N: INJ-875-MT-S Manufactured by Siemens 14mm Fuel Rail Bore Short Length (40mm) - Upper to Lower O-Ring Minitimer / Jetronic Connector

Short Length (40mm) Injectors - USCAR Connector

	500cc Injectors, Short (USCAR Connector) P/N: INJ-500-US-S Manufactured by Bosch 14mm Fuel Rail Bore Short Length (40mm) - Upper to Lower O-Ring USCAR Connector

	731cc Injectors, Short (USCAR Connector) P/N: INJ-731-US-S Manufactured by Bosch 14mm Fuel Rail Bore Short Length (40mm) - Upper to Lower O-Ring USCAR Connector

3/4 Length (55mm) Injectors - USCAR Connector

	550cc Injectors, 3/4 Length (USCAR Connector) P/N: INJ-525-US-M Manufactured by Bosch 14mm Fuel Rail Bore 3/4 Length (55mm) - Upper to Lower O-Ring USCAR Connector

Full Length (65mm) Injectors - Minitimer / Jetronic Connector

	347cc Injectors, Long Length (Minitimer / Jetronic Connector) P/N: INJ-347-MT-L Manufactured by Bosch 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring Minitimer / Jetronic Connector

	443cc Injectors, Long Length (Minitimer / Jetronic Connector) P/N: INJ-443-MT-L Manufactured by Bosch 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring Minitimer / Jetronic Connector

	668cc Injectors, Long Length (Minitimer / Jetronic Connector) P/N: INJ-668-MT-L Manufactured by Siemens 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring Minitimer / Jetronic Connector

	875cc Injectors, Long Length (Minitimer / Jetronic Connector) P/N: INJ-875-MT-L Manufactured by Siemens 14mm Fuel Rail Bore Full Length (65mm) - Upper to Lower O-Ring Minitimer / Jetronic Connector

Fuel Injector Connectors / Adapters

	Connector Only w/ Pins, Minitimer / Jetronic, each P/N: INJ-CON-MT

	Connector Only w/ Pins, USCAR, each P/N: INJ-CON-US

	Adapter - Use USCAR Injectors on Minitimer / Jetronic Vehicles P/N: INJ-ADA-US-MT

	Adapter - Use Minitimer / Jetronic Injectors on USCAR Vehicles P/N: INJ-ADA-MT-US

Injector CNC Extensions

	Injector CNC Extension, 14mm - Short P/N: INJ-EXT-14S Raises Height of Injector by 10mm Use 3/4 Length Injectors in Full Length Applications

	Injector CNC Extension, 14mm - Medium P/N: INJ-EXT-14M Raises Height of Injector by 15mm Use Short Length Injectors in 3/4 Length Applications

	Injector CNC Extension, 14mm - Long P/N: INJ-EXT-14L Raises Height of Injector by 25mm Use Short Length Injectors in Full Length Applications

Click Here to view the Fuel Systems Price List