 |
|
Home > Supercharger Kits > Chrysler Supercharger Kits
Chrysler Supercharger Kits
|
Vehicle Application List:
Vortech
'05-'09 Chrysler/Dodge 5.7L Hemi
'05-'10 Chrysler/Dodge 6.1L (SRT8) Hemi
'06-'10 Jeep SRT8
Paxton
Small Block Mopar Carby
Big Block 440
Mopar Carby
'92-'96 Dodge Viper RT/10
'96-'02 Dodge Viper GTS
'03-'06 Dodge Viper SRT-10
'04-'05 Dodge SRT-10 Ram Truck (6-Speed)
'04-'06 Dodge SRT-10 Ram Truck (Auto Trans)
|
|
|
'05-'09 Chrysler/Dodge 5.7L Hemi Systems
|
|
- For Chrysler 300C, Dodge Magnum and Charger. Increases HP from 340 to 432, torque from 390 to 471. All kits include V-3 (self-lubricated) supercharger.
- New Vortech V-3 Si-Trim gear driven centrifugal supercharger features an internal lubrication reservoir that does not require a connection between the engine oil pan and the compressor gear case... no oil line.
- The V-3 includes remote fluid drain hose (attached to supercharger) that allows for simple fluid changes without removing the supercharger from the vehicle
- Technologically advanced, high-efficiency impeller and housing design developed in our SAE J1723 compliant supercharger test cell.
- Fuel management upgrade includes high-flow fuel injectors, 2 bar Map sensor and DiabloSport™ Predator hand-held programmer which controls ignition timing and fuel enrichment
- Integrated dual-pass air/water charge cooler configuration features a closed loop water cooling system with a stand-alone pump, tank and front mounted heat exchanger High-flow bypass valve provides for surge-free compressor operation Inlet and discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps
- Billet aluminum mounting bracketry for "factory installed" appearance and rigidity
- Complete bolt-on system including all necessary belts, pulleys and reusable high-flow air filter
* Vortech is currently testing to confirm calibration on 2005 and 2008 vehicles. Complete kits are approved only for 2006 and 2007 vehicles at this time.
|
|
|
|
|
|
|
| 4CL218-010L |
'05-'08 5.7L Hemi, V-3 Si-Trim, Charge Cooled, Satin |
$POA |
| 4CL218-018L |
'05-'08 5.7L Hemi, V-3 Si-Trim, Charge Cooled, Polished |
$POA |
|
'05-'10 Chrysler/Dodge 6.1L (SRT8) Hemi Systems
|
|
For 6.1L (SRT8) vehicles. Chrysler 300C, Dodge Magnum, Charger and Challenger. Increases HP from 425 to 560*, torque from 420 to 510 at 6.5 PSI. All kits include V-3 (self-lubricated) supercharger.
- New Vortech V-3 Si-Trim gear driven centrifugal supercharger features an internal lubrication reservoir that does not require a connection between the engine oil pan and the compressor gear case... no oil line.
- The V-3 includes remote fluid drain hose (attached to supercharger) that allows for simple fluid changes without removing the supercharger from the vehicle
- Technologically advanced, high-efficiency impeller and housing design developed in our SAE J1723 compliant supercharger test cell.
- Fuel management upgrade includes high-flow fuel injectors, 2 bar Map sensor, fuel pump voltage booster assembly and DiabloSport™ Predator hand-held programmer which controls ignition timing and fuel enrichment
- Integrated dual-pass air/water charge cooler configuration features a closed loop water cooling system with a stand-alone pump, tank and front mounted heat exchanger
- High-flow bypass valve provides for surge-free compressor operation
- Inlet and discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps
- Billet aluminum mounting bracketry for "factory installed" appearance and rigidity
- Complete bolt-on system including all necessary belts, pulleys and reusable high-flow air filter
** Vortech is currently testing to confirm calibration on 2005 and 2008 vehicles. Complete kits are approved only for 2006 and 2007 vehicles at this time.
|
|
|
|
|
|
|
| 4CL218-020L |
'05-'08 Charger/Magnum/300C 6.1L Hemi, V-3 Si-Trim, Charge Cooled, Satin |
$POA |
| 4CL218-028L |
'05-'08 Charger/Magnum/300C 6.1L Hemi, V-3 Si-Trim, Charge Cooled, Polished |
$POA |
| 4CL218-030L |
'08 Challenger 6.1L Hemi, V-3 Si-Trim, Charge Cooled, Satin |
$POA |
| 4CL218-038L |
'08 Challenger 6.1L Hemi, V-3 Si-Trim, Charge Cooled, Polished |
$POA |
|
|
|
